Send data using Bluetooth
Several Bluetooth connections can be active at a time. For
example, if you are connected to a headset, you can also
transfer files to another compatible device at the same
Bluetooth connectivity indicators
is shown in the standby mode, Bluetooth
connectivity is on.
is blinking, your device is trying to connect
with another device.
is shown continuously, data is being
transmitted using Bluetooth connectivity.
Tip! To send text using Bluetooth connectivity, open
Notes, write the text, and select
Open an application or folder where the item you want
to send is stored. For example, to send an image to
another compatible device, open Gallery.
Select the item and
The device icon, the name of the device, the device
type, or a short name for devices with Bluetooth
technology within range start to appear on the display.
video device, and
Copyright © 2006 Nokia. All rights reserved.
To interrupt the search, select Stop.
Select the device with which you want to connect.
If the other device requires pairing before data can be
transmitted, a tone sounds, and you are asked to enter
a passcode. See 'Pair devices', p. 92.
When the connection has been established,
using Bluetooth connectivity.
Tip! When searching for devices, some devices may
show only the unique address (device address). To find
the unique address of your device, enter the code
*#2820# in the standby mode.
To open the paired devices view (
application main view, scroll right.
Before pairing, create your own passcode (1—16 digits),
and agree with the owner of the other device to use the
same code. Devices that do not have a user interface have
a factory-set passcode. The passcode is used only once.
To pair with a device, select
Devices with wireless Bluetooth technology within range
start to appear on the display. Select the device, and enter
the passcode. The same passcode must be entered on the
does not store messages sent
), in the