Synchronisation - Nokia TransACT N91 8GB Owner's Manual

• Operation at a frequency of 2.4 GHz
• Encryption methods wired equivalent privacy (WEP)
with keys up to 128 bits, Wi-Fi protected access
(WPA), and 802.1x. These functions can be used only if
they are supported by the network.
You can create an Internet access point (IAP) in a wireless
LAN and use it for applications that need to connect to
the Internet.
Create an Internet access point
1
Press , and select
Availab. WLAN.
2
The device searches for wireless LANs within range. To
create an Internet access point in a network, select
Options > Define access
3
The device creates an Internet access point with
default settings. To view or change the settings of the
Internet access point, see 'Access points', p. 104.
When an application asks you to select an access point,
select the created access point, or
search for wireless LANs in range.
A wireless LAN connection is established when you create
a data connection using a wireless LAN Internet access
point. The active wireless LAN connection ends when you
end the data connection. To end the connection, see
'Connection manager', p. 94.
96 Copyright © 2006 Nokia. All rights reserved.
Connect. > Conn. mgr. >
point.
Search for WLAN, to
You can use wireless LAN during a voice call or when
packet data is active. You can only be connected to one
wireless LAN access point device at a time, but several
applications can use the same wireless LAN connection.
When you activate the Offline
wireless LAN (if available). Remember to comply with any
applicable safety requirements when establishing and
using a wireless LAN connection.
There are two operating modes in wireless LAN:
Infrastructure and Ad-hoc.
The infrastructure operating mode allows two kinds of
communication: wireless devices are connected to each
other through a wireless LAN access point device, or
wireless devices are connected to a wired LAN through a
wireless LAN access point device.
In the ad hoc operating mode, devices can send and receive
data directly with each other. To create an Internet access
point for the ad hoc network, see 'Access points', p. 104.
Tip! To check the unique Media Access Control (MAC)
address that identifies your device, enter *#62209526#
in the standby mode.

Synchronisation

profile, you can still use