Table of Contents
Advertisement
Personalize your device
Your service provider may have requested that certain
features be disabled or not activated in your device. If so,
they will not appear on your device menu. Your device
may also have been specially configured for your network
provider. This configuration may include changes in menu
names, menu order, and icons. Contact your service
provider for more information.
Profiles—Set tones
To set and customize the ringing tones, message alert
tones, and other tones for different events, environments,
or caller groups, press
the currently selected profile is other than General, the
profile name is shown at the top of the display in the
standby mode.
To change the profile, press
Scroll to the profile you want to activate, and select OK.
To modify a profile, press
Scroll to the profile, and select
Scroll to the setting you want to change, and press the
joystick to open the choices. Tones stored on the hard
drive are indicated with
28
Copyright © 2006 Nokia. All rights reserved.
, and select
Tools
> Profiles. If
in the standby mode.
, and select
Tools
> Profiles.
Options
> Personalise.
. You can scroll through the
tone list and listen to each one before you make your
selection. To stop the sound, press any key.
When you choose a tone,
Tone downloads
bookmarks. You can select a bookmark and connect to a
Web page to download tones.
If you want the caller's name to be said when your device
rings, select
Options
> Personalise, and set
name
to On. The caller's name must be saved in Contacts.
To create a new profile, select
If listen to music and
Music
hear a beep for incoming calls and all the other alert tones
are switched off.
Offline profile
The
Offline
profile lets you use the device without
connecting to the wireless network. When you activate the
Offline
profile, the connection to the wireless network is
turned off, as indicated by
indicator area. All wireless phone signals to and from the
device are prevented. If you try to send messages, they are
placed in the outbox to be sent later.
opens a list of
Say caller's
Options
>
Create
new.
profile is selected, you only
in the signal strength
Advertisement
Table of Contents
