Log In To Push To Talk Service; Push To Talk Calls - Nokia E70 User Manual

Callback request tone
•
callback requests.
Application start-up
•
the push to talk service when you switch on your
device.
Default nickname
•
(20 characters maximum) that is displayed to other
users.
Show my PTT address
•
to see your push to talk address. You can let all callers
see the address, show the address only to one-to-
one callers or channel participants, or hide the
address from all callers.
Show my login status
•
to the push to talk server is shown or hidden from
other users.
Connection settings
Select Options Settings
>
Define the following:
Domain — Enter the domain name obtained from
•
your service provider.
Access point name
•
point.
Server address — Enter the IP address or domain
•
name of the push to talk server obtained from your
service provider.
User name — Enter your user name obtained from
•
your service provider.
Password — Enter a password, if required, to log into
•
the push to talk service. The password is provided by
the service provider.
30
— Define the ringing tone for
— Select if you want to log in to
— Enter your default nickname
— Define if you want callers
— Define whether your login
Connection settings.
>
— Select the push to talk access

Log in to push to talk service

If you have set Application start-up
settings, push to talk automatically logs in to the service
when started. If not, you must log in manually.
To log in to a push to talk service, select
Settings Connection settings, and enter your
>
name, Password, Domain,
point name. Select Options
When the Ringing type setting of your device is set to
Beep once or Silent, or there is an ongoing phone call,
you cannot make or receive push to talk calls.

Push to talk calls

Warning: Do not hold the device near your ear
when the loudspeaker is in use, because the volume
may be extremely loud.
Select Options PTT contacts.
>
To make a push to talk call, select one or several
contacts from the list, and press the voice key.
Remember to hold the device in front of you during a
push to talk call so you can see the display. The display
informs you when it is your turn to speak. Speak
towards the microphone, and do not cover the
loudspeaker with your hands. Press and hold the voice
key the entire time you are talking. When you have
finished talking, release the key.
To end the push to talk call, press the end key.
on in User
Options
>
User
Server address, and Access
Switch PTT on.
>