Log In To Push To Talk; Exit Push To Talk; Make A One-To-One Call - Nokia 3250 User Manual

C o n n e c t i v i t y
Show my PTT address
Never if you want to hide your
push to talk address from others in
push to talk channels and
one-to-one calls.
Show my login status
Yes if you want your status to be
shown or No if you want your
status to be hidden.
Connection settings
Domain — Enter the domain name
obtained from your service
provider.
Access point name
push to talk access point name.
The access point name is needed
to establish a connection to the
GSM/GPRS network.
Server address — Enter the IP
address or domain name of the
push to talk server obtained from
your service provider.
User name — Enter your user
name obtained from your service
provider.
Password — Enter your password
used to enter the push to talk
service.

Log in to push to talk

Select Menu > Connect.
Push to talk automatically logs in
to the service when started.
110
Copyright © 2006 Nokia. All rights reserved.
— Select When log in is successful, push to
talk automatically connects to
channels that were active when
the application was last closed. If
the connection is lost, the device
automatically tries to log back in
— Select
until you exit push to talk.
connection.
set to do not disturb (DND).

Exit push to talk

Select Menu >
— Enter the
Options > Exit.
talk off after exiting application?
is displayed. Select
and close the service. If you want
to keep the application active in
the background, select No.

Make a one-to-one call

1. Select Menu >
> PTT.
2. When the connection has been
indicates a push to talk
indicates that push to talk is
Connect.
Switch push to
Yes
Warning: Do not hold the
device near your ear when
the loudspeaker is in use,
because the volume may
be extremely loud.
Connect.
PTT > Options > PTT
scroll to the contact you want
to talk to, and select Options >
Talk 1 to 1.
established, to talk to the other
> PTT >
to log out
>
contacts,