To start voice dialling, press and hold the
selection key. If you are using a compatible headset
with the headset key, press and hold the headset key to
start voice dialling.
A short tone is played, and
clearly the name or nickname that is saved on the
The device plays a synthesised voice tag for the
recognised contact in the selected device language,
and displays the name and number. After a timeout of
1.5 seconds, the device dials the number.
If the recognised contact was not correct, select
to view a list of other matches, or
If several numbers are saved under the name, the device
selects the default number, if it has been set. Otherwise
the device selects the first available number of the
Answer or reject a call
To answer the call, press
To mute the ringing tone when a call comes in, select
is displayed. Say
to cancel voice
or open the slide cover.
Tip! You can also use the
control to answer and end a call.
If you do not want to answer a call, press
it. If you have activated the
to divert calls, rejecting an incoming call also diverts the
call. See 'Call diverting', p. 110.
When you reject an incoming call, you can also select
Send text message
to send a message to the caller
informing why you cannot answer the call. You can edit
the text before sending it. To set up this option and write
a standard text message, see 'Call settings', p. 102.
Call waiting (network service)
You can answer a call while you have another call in
progress if you have activated
Tip! To change the device tones for different
environments and events, for example, when you want
your device to be silent, see 'Profiles—Set tones', p. 28.
To answer the waiting call, press
To switch between the two calls, select Swap. Select
to connect an incoming call or a call
on hold with an active call and to disconnect yourself from
Copyright © 2006 Nokia. All rights reserved.
key on the remote
. The first call is put