Push To Talk Calls; Log In To Push To Talk Service; Callback Requests - Nokia E60 User Manual

Connection settings
Select Options Settings
>
Define the following:
Domain — Enter the domain name obtained from
•
your service provider.
Access point name
•
point.
Server address — Enter the IP address or domain
•
name of the push to talk server obtained from your
service provider.
User name — Enter your user name obtained from
•
your service provider.
PTT password — Enter a password, if required, to log
•
into the push to talk service. The password is provided
by the service provider.

Log in to push to talk service

If you have set Application start-up
push to talk automatically logs in to the service when
started. If not, you must log in manually.
To log in to a push to talk service, select
Settings Connection
>
name, PTT password, Domain,
point name. Select Options
When the Ringing type
Beep once or Silent, or there is an ongoing phone call, you
cannot make or receive push to talk calls.
30
Connection settings.
>
— Select the push to talk access
on in User settings,
Options
>
settings, and enter your User
Server address, and
Switch PTT on.
>
setting of your device is set to

Push to talk calls

Warning: Do not hold the device near your ear
when the loudspeaker is in use, because the volume may
be extremely loud.
Select Options
>
To make a push to talk call, select one or several contacts
from the list, and press the voice key. Remember to hold
the device in front of you during a push to talk call so you
can see the display. The display informs you when it is
your turn to speak. Speak towards the microphone, and
do not cover the loudspeaker with your hands. Press and
hold the voice key the entire time you are talking. When
you have finished talking, release the key.
To end the push to talk call, press the end key.
Answer or reject a call
When you receive a push to talk call, press the call key to
answer the call or the end key to dismiss the call.

Callback requests

To send a callback request, select
contacts, scroll to the desired contact, and select
Access
Options Send callback
>
To answer a callback request, select
callback request. To make a push to talk call to the sender,
press the voice key.
PTT contacts.
Options PTT
>
request.
Show to open the