answer—To set the device to answer an
incoming call automatically after 5 seconds. If the Ringing
type is set to
, and select
you can enable one or more positioning methods to allow
compatible applications to receive the position
information of the current location of your device. When
you enable a positioning method you can, for example,
save the position information of your current location in
Positioning methods may be network based (network
service) or they may require that you use a compatible
GPS receiver. To enable a positioning method, scroll the
method, and select
To start using a compatible GPS receiver with Bluetooth
connectivity for positioning, scroll to
> Enable. If asked, select your GPS receiver
from the found devices with Bluetooth connectivity, and
pair the devices. See "Pair devices", p. 92.
The Global Positioning System
The Global Positioning System (GPS) is operated by the
Copyright © 2006 Nokia. All rights reserved.
or Silent, automatic answer is
> Position.. With Positioning,
United States government, which is solely responsible for
accuracy and maintenance of the system. The accuracy of
location data can be affected by adjustments to GPS
satellites made by the United States government and is
subject to change with the United States Department of
Defense civil GPS policy and the Federal Radionavigation
Plan. Accuracy can also be affected by poor satellite
geometry. Availability and quality of GPS signals may be
affected by your location, buildings and natural obstacles
as well as weather conditions. The GPS receiver should only
be used outdoors to allow reception of GPS signals. GPS
should only be used as a navigation aid. It should not be
used for precise location measurement and you should
never rely solely on location data from the GPS receiver for
positioning or navigation.
You may receive a request from a network service to
receive your position information. Service providers may
offer information about local topics, such as weather or
traffic conditions, based upon the location of your device.
When you receive a position request, a message is
displayed showing the service that is making the request.
sent, or select
to allow your position information to be
to deny the request.