Usb Operation; Specifications - Hyundai TRC 851AU3B Instruction Manual

USB OPERATION

GENERAL OPERATION
PLAY/PAUSE
SKIP + &
SKIP −
STOP
PLAyBACK
1. Plug or slot in USB device to the port.
2. Set the "FUNCTION" selector to "CD/MP3/USB" mode.
3. It will read and automatic playing USB, if no disc on disc tray.
4. It will read and automatic playing DISC, if have disc on disc tray.
5. Press and hold the "PLAY/PAUSE" button for a few seconds to entry USB mode.
6. Playback will start automatically from the first track.
7. Press the "STOP" button when finished.
PROGRAM, MODE
The operation of PROGRAM, MODE are as the same as that of CD/MP3.
Please refer to CD/MP3 OPERATION.
AUTOMATIC STANDBy SwITCHING
To comply with the "ERP2 (Energy Related Products)" Ecodesign Directive (2009/125/EG),
its ultimate aim is to reduce the energy consumption of energy–using products; the device
automatically switches to standby after approx. 10 minutes without a signal. In order to use
the device again, switch the device off and then on again.

SPECIFICATIONS

Power requirement:
Output power:
Dimensions:
Weight (NET):
Press to start playing tracks from the USB.
Press again to stop playing USB operation temporarily.
Press again to resume playback.
Press to go to the next track or back to the previous track.
Press and hold while playing until you find the point
of the sound.
Press to stop all USB operation.
230 V/50 Hz
2 x 2 W
300 (W) × 155 (H) × 245 (D) mm
2080 g
EN - 40