Using The Radio; Turntable Operation - Hyundai RTCC 770 SU Instruction Manual

USING THE RADIO

To turn the radio on
Make sure the power is on before turning on the radio.
Turn the Function knob to Radio position.
Use the AM/FM Band Selector to select the band.
Turn the Tuning Knob to select the channel you want.
Antenna
For best FM reception, extend the wire antenna located at the back of the unit.
Move it around until you get the best FM reception.
To turn the radio off
Set the Function Selector to Off, Phono, CD.
USING THE PHONO PLAYER
UNPACKING THE TURNTABLE
1) Carefully remove the unit from the styrofoam and take it out of the plastic bag.
2) Open the lid and remove the tie-wrap by untwisting and gently sliding it out from under the
Tone Arm.
3) Remove packing material.
4) Take the rubber mat out of plastic bag and lay it on the Turntable. The side with the round
rings faces down.
5) Remove the protective needle cover by gently pulling it toward the front of the Unit.
• Using a coin. Turn the large chrome screw (25) clockwise until it is down. This allows the
turntable (24) to float on its shock absorbers.
• Release the security Hook by gently pushing it to the right.
This will unlock the Tone Arm (18) from the Tone Arm Lock( 21). Use the security hook
whenever moving the unit to another location.

TURNTABLE OPERATION

1) Plug the unit into a standard AC230V~50HZ Outlet.
EN - 30