FOLDER SELECT
Press the "M+/ALBUM" button to select folder. (Folder select function can only operate if disc store with at least 2
directories / files.)
PROGRAM
Up to 20 tracks fo CD disc, 99 tracks of MP3 disc can be programmed for disc play in any order.Be sure to press the "STOP"
button before use.1. Press the "MODE" button, the display will show "P01".
1) Press the "MODE" button, the display will show "P01".
2) Select desired track by using the "SKIP +" or "SKIP −" button. (You may select a desired album by pressing the "M+/ALBUM"
button).
3) Press the "MODE" button again to confirm desired track into the program memory.
4) Repeat step 2 and 3 to enter additional tracks into the program memory.
5) When all the desired tracks have been programmed, press the "PLAY / PAUSE/SCAN" button to play the disc in the order
you have programmed.
6) Press the "STOP" button twice to terminate programmed playback.
MODE
Press the "MODE" button during playing CD / MP3 disc,each press switches
the mode function as follows:
1 – REPEAT 1
2 – REPEAT ALBUM (*MP3 ONLY)
3 – REPEAT ALL
4 – RANDOM
5 – NORMAL PLAYBACK
USB OPERATION
GENERAL OPERATION
Press to start playing tracks from the USB. Press again to stop playing USB operation temporarily.
PLAY / PAUSE
Press again to resume playback.
Press to go to the next track or back to the previous track.
SKIP + &
Press and hold while playing until you find the point of the sound.
SKIP −
Press to stop all USB operation.
STOP
PLAYBACK
1) Plug or slot in USB device to the port.
2) Press the „ST / FUNC" button to select "USB" mode.
3) Playback will start automatically from the first track and the display will show "USB".
4) Press the "STOP" button when finished.
PROGRAM, MODE
The operation of PROGRAM, MODE are as the same as that of CD / MP3. Please refer to CD / MP3 OPERATION.
OTHER FEATURES
AUX IN
- Connect 3.5 mm cable to this unit and your device.
- Switch on the unit. Aux-in available to operate in any mode.
- Press play on your device and enjoy.
Remark: 3.5 mm Aux-in cable not include.
AUTO-OFF
This product is equipped with an auto power-save function in the CD/USB mode, if the unit
remains in STOP, PAUSE or NO DISC mode for more than 10 minutes it will automatically switch off. Please press the "PLAY"
button to re-active the unit.
SETTING
1) Press and hold the "ST / FUNC" button to switch unit at standby mode.
2) Press and hold the "SLEEP / TIME SET" button to entry clock set mode. The display will show "24H" and flashing.
3) Adjust time format (12H / 24H) by pressing the "SKIP +" or "SKIP −" button.
4) Press the "SLEEP / TIME SET" button to confirm time format, display will show "AM 12:00" if 12H format is set or "0:00" if
24H is set.
5) Adjust hour by pressing the "SKIP +" or "SKIP −" button, press the "SLEEP / TIME SET" button to confirm.
6) Adjust minute by pressing the "SKIP +" or "SKIP −" button, press the "SLEEP / TIME SET" button to confirm.
Notes: Because clock setting is at standby mode, the display is dim.
REPEAT 1
EN - 20
REP
REP
ALBUM
REPEAT
ALBUM
RAND
NORMAL
RANDOM
PLAYBACK
REP
ALL
REPEAT
ALL