Cleaning; Clipperhead And Hinge; Contacts - Heiniger Saphir series Instruction Manual

ATTENTION!
Remove all the leaking, used up or excessive grease from all the lubrication points,
and it is to be disposed in accordance with the local regulations.

6.2.5 Cleaning

To receive good clipping results and to increase the durability of the clipper and the
clipperhead, it is necessary to apply a thin oil coat between top and bottom blade
(6.2.4 Lubrication).

Clipperhead and hinge

Clean clipperheads und hinge between the different clippings.
Charging station
fig. 23

Contacts

If required, clean the contacts of the batteries and the clipper with a dry cloth.
NOTE!
When not in use daily, store the clipper and charging station in the provided case.
When in use daily, we recomend to put clipper and reserve battery in the charging
station.
14
1. Disconnect the charging station from the
power supply.
2. If necessary, take away hairs from both
charging cavities.
3. If required, clean the contacts (1) and (2)
with a dry cloth.
Instruction Manual / Small animal clipper