Fitting The Clipperhead - Heiniger Saphir series Instruction Manual

NOTE!
If the clipper (1) and the spare battery (2) are standing simultaneously in the charging
station, only the battery in the clipper (1) is charging.
The spare battery (2) is only charging when the clipper is taken out of the charging
station.
7. Hold the charger firmly with one hand and pull the clipper (1) or the battery (2) out
with the other.

6.1.3 Fitting the clipperhead

fig. 14
fig. 15
fig. 16
fig. 17
Instruction Manual / Small animal clipper
1. If the blade hinge (2) is closed inad-
vertently, open it by the help of a
screwdriver (1).
2. Fit the clipperhead (1) on the open
blade hinge (2).
3. Fold the clipperhead (2) by light pres-
sure on to the clipper (1) which is
switched on.
4. Make sure, that the clipperhead (1) is
engaged firmly.
NOTE!
For proper operation make
sure that the clipperhead (1)
is engaged correctly.
11