Transport, Packaging And Storage; Operation; Initial Start-Up; Setting Up The Charging Station - Heiniger Saphir series Instruction Manual

5 Transport, packaging and storage

Check the delivery on receipt immediately on completeness and damage in transit.
NOTE!
Complain any damage as soon as you discover it. Claims for damages only may be
made within the valid time.
For the packaging, just non-polluting material is being used.
The case is intended to protect the different units against damage in transit, corrosion
and other damages.
Store clipper and accessories on the following conditions:
• Always store in the provided case.
• Do not store outdoor.
• Store dry and dust-free.
• Protect against solar irradiation.
• Avoid mechanical shocks.
• Storage temperature: 0 until 40°C.
• Relative humidity: max. 75 %.
• When storing longer than 3 months, check periodically the general condition of all
parts. If necessary, refresh or renew the conservation.

6 Operation

WARNING!
Incorrect operation may cause damage on persons or objects. Therefore:
• Do all the steps of operation according to the indications in this instruction manual.
6.1

Initial start-up

6.1.1 Setting up of the charging station
• Observe all technical data according to the operating conditions (3 Technical Data).
• The installation surface must be even and must dispose of sufficient stability and
payload.
• The location of installation must be protected against humidity and rain.
• Power outlets in the outer area must be equipped with a residual current circuit
breaker (FI).
• The workplace must dispose of sufficient illumination and ventilation.
• The location of installation must be out of reach of children.
Instruction Manual / Small animal clipper 9