SAGEMCOM F@ST 4310 Reference Manual page 76

5- Information / Configuration
• Click on the Next button to continue configuring the remote network (WAN) in IPoA mode.
Field
Enable NAT
Enable Fullcone NAT
Enable Firewall
Enable IGMP Multicast
a. This field only appears when the "Enable NAT" field is activated (box checked).
• Click on the Next button to continue configuring the remote network (WAN) in IPoA mode.
Page 5-44
Check the box to activate the NAT function.
Note: NAT is a configurable IP address
translation function which will be applied
to the interfaces of your router which you
will have activated for this function.
Check the box to activate the Fullcone NAT
a
function.
Check the box to activate the Firewall service.
Check the box to activate the IGMP function.
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
Action Default value
Not checked
Not checked
Not checked
Not checked
F@ST 4310 Reference Manual