SAGEMCOM F@ST 4310 Reference Manual page 61

Field
Use the following Static
DNS IP address
Primary DNS server
Secondary DNS server
Select DNS Server Interface from available WAN interfaces
Button
• Click on the Next button to continue configuring the remote network (WAN) in PPPoE mode.
Field
NAT
Firewall
IGMP Multicast
Quality of Service
• Click on the Apply/Save button to confirm the new WAN service.
F@ST 4310 Reference Manual
If you check this box, you must enter DNS server
addresses.
Enter a primary DNS server address.
Enter a secondary DNS server address.
Transfer the interfaces selected in the Available WAN
Interfaces area to the Selected DNS Server Interfaces area.
Transfer the interfaces selected in the Selected DNS Server
Interfaces area to the Available WAN Interfaces area.
Displays the status of the NAT.
Displays the status of the firewall.
Displays the status of the IGMP function.
Displays the status of the Quality of Service function.
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
5- Information / Configuration
Action
Action
Description
Default value
Not checked
-
-
Page 5-29