Status Of The Dhcp Server - SAGEMCOM F@ST 4310 Reference Manual

4- Configuration of network parameters

4.2 Status of the DHCP server

To obtain the status of the DHCP server:
1. Open your browser.
2. Enter the router's IP address (by default http://192.168.1.1) or enter the following URL
http://myrouter
3. In the login screen that appears, enter "admin" in the "User Name" field and the "Password" field (see
note).
Note
The User name and Password values are written on the label.
4. Click on the OK button to validate.
5. Select Advanced Setup menu, then select the LAN menu.
The following screen appears:
Field
IP Address
Subnet Mask
Start IP Address
End IP Address
Leased Time (hour)
Page 4-4
Displays the sub-network address.
Displays the sub-network mask of the IP network.
Displays the first address attributed by the DHCP server.
Note: This IP address must belong to the same
sub-network as that of the local network.
Displays the last address attributed by the DHCP server.
Note: This IP address must belong to the same
sub-network as that of the local network.
Displays the period (in hours) for obtaining an IP address
for a terminal.
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
Description Display
192.168.1.1
255.255.255.0
192.168.1.2
192.168.1.254
24
F@ST 4310 Reference Manual