3.
Wallmount installation is completed as shown in the figure below. Then in the
rear of the machine, lock the hook screw and fix the machine according to Sec-
tion 2.10 "Hook Installation".
Note!
It is recommended that the mounting thickness is smaller than 2 mm
(0.079") according to the quick installation guide. For other situations,
the recommended thickness is less than 6 mm (0.236").
2.12
Cradle Installation Description
Note!
For the cradle, you can choose Advantech product (Part No. PPC-
4150W-STANDE). Please refer to the included description for the instal-
lation method.
19
PPC-4151W User Manual