Setting Data Bits; Figure 4-19 Data Bits Setup For Remote Control - Agilent Technologies U1253A User's And Service Manual

4 Changing the Default Settings

Setting data bits

104
The number of data bits (data width) for remote
communication with a PC can be set to either 8 or 7 bits.
The number of stop bit is always 1, and this cannot be
changed.

Figure 4-19 Data bits setup for remote control

Press Hz
to edit
Press
to switch between
7 and 8
Press Hz to save
and exit
or press ESC
to exit without saving
U1253A User's and Service Guide
or