Lan - ZyXEL Communications VMG1312 Cli Reference Manual

www.zyxel.com
pid... Specify the list of processes that kill should sigal.
-signal given as a signal name or number.
-l List all signal names and numbers.
EXAMPLES
° Terminate the process with pid 120
> kill 120
° Send KILL signal to the process with pid 120
> kill –SIGKILL 120
° List all signal names and numbers
> kill -l
NAME
lan – allow a user to configure the IP layer for the LAN interfaces
SYNOPSIS
lan config [--ipaddr <primary|secondary> <IP address> <subnet mask>]
lan delete –ipaddr <primary|secondary>
lan show [<primary|secondary>]
lan --help
DESCRIPTION
Lan is used to configure the IP layer data for the primary and secondary LAN interfaces. A LAN interface
is a logic interface toward IP stack from the Bridge module. Both primary and secondary LAN interfaces
share the same MAC address from the physical Ethernet port. This utility can:
° Configure the IP address and subnet mask for the primary LAN interface. It Can be either a private or a
public IP address.
° Configure the IP address and subnet mask for the secondary LAN interface. NAT is not supported on the
secondary LAN interface. Only public IP address is allowed.
ZyXEL Confidential
[--dhcpserver <enable|disable>]
[--dhcpclient <enable|disable>]

LAN

32