Udpechod - ZyXEL Communications VMG1312 Cli Reference Manual

www.zyxel.com
wlan get chquality
wlan show
wlan --help <wep|psk|wpa|psk2|wpa2|psk-psk2|wpa-wpa2>
DESCRIPTION
This command can be used to get and setting wireless interface parameter then save to config. Allow a user
to add/delete/show the LWAN interfaces and connection sevice for the xDSL router. WLAN is used to
configure the wireless networking protocols for each LWAN interface. Currently each WLAN interface
occupies one layer 2 interface. To create a wlan connections service.
All information is displayed to stdout. A program or shell script that calls this utility can redirect stdout to
a file and then parse the file in order to interpret the displayed output.
OPTIONS
None
EXAMPLES
None
NAME
udpechod – when CEP udpechod is enable then specify an IP address for your UDP connection.
SYNOPSIS
Usage: udpechod set enable <0|1>
udpechod set interface <interface name|all>
udpechod set sourceip <ip address>
udpechod set port <port number>
udpechod set enabledudpplus <0|1>
udpechod set supportedudpplus <0|1>
udpechod show
udpechod help
DESCRIPTION
ZyXEL Confidential
[--bandwidth <20MHZ|40MHZ>]
[<primary|secondary:1|secondary:2|secondary:3>]

UDPECHOD

115