Brctl - ZyXEL Communications VMG1312 Cli Reference Manual

www.zyxel.com
° Show ARP table.
> arp show
IP address HW type Flags HW address Mask Device
192.168.1.3 0x1 0x2 00:01:03:E3:4F:F9 * br0
192.168.1.2 0x1 0x6 00:11:22:33:44:55 * br0
° Delete ARP entry for IP address 192.168.1.2.
> arp delete 192.168.1.2
NAME
brctl – bridge administration utility
SYNOPSIS
brctl [ command ]
DESCRIPTION
brctl is used to set up, maintain, and inspect the bridge configuration.
A bridge is a device commonly used to connect different networks (Ethernet, USB, 802.11x wireless
network or ATM) together, so that these networks will appear as one network to the participants.
Each of the networks being connected corresponds to one physical interface (port) in the bridge. These
individual networks are bundled into one bigger ('logical') network, this bigger network corresponds to the
bridge network interface such as "br0".
COMMANDS
addbr <bridge>
Creates a new instance of the bridge. The network interface corresponding to the bridge will be called
<bridge>.
delbr <bridge>
Deletes the instance <bridge> of the bridge. The network interface corresponding to the bridge must
be down before it can be deleted.
show <bridge>
Shows the instance <bridge> of the bridge.
show
Shows all current instances of the bridge.
addif <bridge> <device>
ZyXEL Confidential

BRCTL

19