Celld - ZyXEL Communications VMG1312 Cli Reference Manual

www.zyxel.com
None.
EXAMPLES
° Display the system log information
> save_default show
° Save the settings information
> save_default save
° Delete the settings information
> save_default clean
NAME
celld –Celld is used to handle the 3G process. after the 3G dongle is inserted or disconnected, celld will get
the message and celld will decide if 3G needs to be dial up or down, celld will communicate with pppd by
sending CMS message to pppd, and after pppd is dial up or down, it will send CMS message back to celld
to let celld know the 3G status.
SYNOPSIS

celld

DESCRIPTION
celld is used to handle the 3G process. after the 3G dongle is inserted or disconnected, celld will get the
message and celld will decide if 3G needs to be dial up or down, celld will communicate with pppd by
sending CMS message to pppd, and after pppd is dial up or down, it will send CMS message back to celld
to let celld know the 3G status.
Cell daemon (celld) will fork two child operator loop and scheduler loop. The job of operator loop is
handling events and dialing up ppp connection.
Scheduler loop checks 3G connection for nail-up and the signals with all slots every 1 minute.
Cell daemon can handle all of cellular events and dial to WAN.
COMMANDS
celld <loglevel>
loglevel is one of "Error", "Notice", or "Debug"
celld checkingTime <time>
ZyXEL Confidential
CELLD
61