Frame - BOMBARDIER Skandic 377 IR Shop Manual

FRAME CLEANING
Clean frame. For aluminum frame use only" Aluminum
cleaner" and follow instructions on container. (Oursol
cleaner or equivalent).
Touch up all metal spots where paint has been scratched
off. Spray all bare metal parts of vehicle with metal pro-
tector.
Seat cleaning
For all 1984 models, it is recommend to clean the seat
with a solution of soft soap/warm water and a soft
cloth.
_ CAUTION: Avoid use of harsh detergent such as
." strong soaps, degreasing solvents, abrasive clean-
ers, paint thinners, etc ... they may cause damage to
the seat cover.
Bottom pan repair
Some bottom pans are made of fiberglass or plastic pro-
ducts, to know if they are reparable or not and how to
repair them refer to section 07 sub-section 01 .
FRAME WELDING
Steel frame:
- Electric Welding
- Amperage : 70-110 Amp .
- Voltage: 20-24 volts
- Rod: E-7014
(3 /32")
Aluminum frame: (refer to specialized welding shop)
- Argon-oxygen /acetylen welding
- Rod: ER-4043
(3 /32")
_ CAUTION: When electrical welding is to be per-
." formed anywhere on the vehicle, unplug the mul-
tiple connector at the electronic box prior to connec-
ting the welding wire to the vehicle. This will protect
the electronic box against damage caused by flowing
current when welding.
O
NOTE: This procedure applies to all electronic ig-
nition systems.
SECTION 07 HOOD/FRAME
SUB-SECTION 02 (FRAME)
FRAME
_ CAUTION: When welding is to be performed
. " near bottom pan of Sonic LlC, SS-25, Safari
377/E, 447, Grand Luxe, protect bottom pan against
fire, sparks and excessive heat. R.I.M. bottom pan are
flammable.
PAGE 399