Mount The Camera; The Screw Size - TP-Link NC200 User Manual

Used as RESET button:

With the camera powered on, press and hold the WPS/RESET button (more than 5
seconds) until both the System LED and WPS LED turn off. Then release the button and
wait the camera to reset to its factory default settings.
Used as WPS button:

If your router supports WPS, then you can press the WPS/RESET button for 1 second to
quickly establish a connection between the camera and router.

2.4 Mount the Camera

2.4.1 The Screw Size

2.4.2 Mount the Camera

Note:
If you use the camera wirelessly, mount the camera within the coverage of your wireless network.
1. Unscrew the camera head.
NC200 Cloud Camera, 300Mbps Wi-Fi
2. Remove the base cover.
5