Basic → Wireless Connection - TP-Link NC200 User Manual

Click Save to save and enable the settings.
3.3.3 Basic → Wireless Connection
The camera's wireless function is enabled by default. This function helps to connect your camera
to a wireless network wirelessly. If you don't want to use this function, just select the Disable
option.
Wireless Network Name: Displays the wireless network's name. Make sure the camera and

your PC connect to the same wireless network, or your PC can't access the camera.
Signal: Displays the strength of the wireless signal.

Security: Displays the wireless network's security mode.

MAC Address: Displays the MAC address of the front device.

To connect your camera to a wireless network, follow the steps below:
Click Scan to scan the available wireless network and to refresh the Wireless Network List.
1.
2. Select a wireless network from the wireless network list.
NC200 Cloud Camera, 300Mbps Wi-Fi
13