4.
Enter the password required to access the SMTP server.
5.
Select TLS as the SSL encryption and the SMPT server port number will be changed to 465
automatically.
6.
Set the Sending Interval, e.g. 1m.
Click Save to save and enable the settings.
7.
Click Test, and a test JPEG snapshot will be sent to the recipient E-mail address to check whether
your settings are correct.
If the settings are tested correct, you will see the following screen. Click OK.
If the settings are tested incorrect, you will see the following screen. Click OK. Please check your
network and E-mail settings and try again later.
3.4.10 Advanced → LED
Refer to
3.3.5 Basic →
3.5 System
Click the System folder to display the sub folders including Account, Date/Time, Management,
and System Log.
LED.
NC200
Cloud Camera, 300Mbps Wi-Fi
31