TP-Link NC200 User Manual page 29

Host Wireless Network Name: Displays the name of the wireless network which your

camera is connected to. It is read-only.
Extended Wireless Network Name: Name of the wireless network that your camera will

extend.
Same as Host: The extended network will use the same name and settings as your Host

network. Your devices can use the same wireless information to connect to both the host
and extended networks.
Create a New One: Select this to manually set the name and security used for the

extended network. You devices can use the wireless parameters you set to connect to the
extended network.
Max Clients: Set the maximum number of clients that are allowed to connect to the extended

network.
Click Save to save and enable the settings.
NC200 Cloud Camera, 300Mbps Wi-Fi
23