TP-Link NC200 User Manual page 41

Current Time: Displays the current date and time of the camera.

Time Zone: Select the time zone for the region where the camera is installed from the

drop-down list. Auto Time zone is recommended.
Enable Daylight Saving Time: Select this option to enable daylight saving time adjustment.

If enabled, you will see the following screen:
Automatically: If selected, the internal system clocks of the camera will adjust the DST

automatically.
Manually: If selected, you can adjust the DST by setting the Time Offset, Start Time, and

End Time.
Synchronize With NTP Server: Select this option to specify the NTP server name to

synchronize the date and time of the camera with those of the time server, known as the NTP
(Network Time Protocol) server. If enabled, you will see the following screen:
NC200 Cloud Camera, 300Mbps Wi-Fi
35