Yamaha FJR1300A(D) Service Manual page 83

Spring stroke K1
Spring stroke K2
Inner tube outer diameter
Inner tube bending limit
Optional spring available
Recommended oil
Quantity
Level
Spring preload adjusting positions
Minimum (soft)
Standard
Maximum (hard)
Rebound damping adjusting positions
Minimum
Standard
Maximum
Compression damping adjusting positions
Minimum
Standard
Maximum
Rear suspension
Type
Spring/shock absorber type
Rear shock absorber assembly travel
Spring free length
Spring installed length
Spring free length
Spring installed length
Soft
Spring rate K1
Spring rate K2
Spring stroke K1
Spring stroke K2
Hard
Spring rate K1
Spring stroke K1
Optional spring available
Enclosed gas/air pressure (STD)
Spring preload adjusting positions
Rider only
With passenger or cargo
Rebound damping adjusting positions
Minimum
Standard
Maximum
CHASSIS SPECIFICATIONS
0.0–67.5 mm (0.00–2.66 in)
67.5–135.0 mm (2.66–5.31 in)
48.0 mm (1.89 in)
0.2 mm (0.01 in)
No
Suspension oil M1 or equivalent
716.0 cm³ (24.21 US oz, 25.20 Imp.oz) (left side)
694.0 cm³ (23.46 US oz, 24.43 Imp.oz) (right
side)
106.0 mm (4.17 in) (left side)
90.0 mm (3.54 in) (right side)
15.0 mm (0.59 in)
10.0 mm (0.39 in)
0 mm (0 in)
16 clicks out
12 clicks out
1 click out
21 clicks out
11 clicks out
1 click out
Swingarm (link suspension)
Coil spring/gas-oil damper
60.0 mm (2.36 in)
157.6 mm (6.20 in)
145.9 mm (5.74 in)
67.8 mm (2.67 in)
62.0 mm (1.26 in)
171.00 N/mm (17.44 kgf/mm, 976.41 lbf/in)
342.00 N/mm (34.87 kgf/mm, 1952.82 lbf/in)
0.0–42.0 mm (0.00–1.65 in)
42.0–60.0 mm (1.65–2.36 in)
171.00 N/mm (17.44 kgf/mm, 976.41 lbf/in)
14.1–60.0 mm (0.56–2.36 in)
No
1200 kPa (12.0 kgf/cm², 170.7 psi)
SOFT
HARD
20 clicks out
12 clicks out
3 clicks out
2-12