Yamaha FJR1300A(D) Service Manual page 181

3
▲ ▲▲▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
▼ ▼▼▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
To install the rider seat in the low position
a. Install the rider seat height position adjuster
"1" so that the "L" mark "a" is aligned with the
match mark "b".
b. Insert the projection "c" on the front of the rid-
er seat "2" into seat holder "d" as shown.
2
d
c. Align the projection "e" on the bottom of the
rider seat "2" with the "L" position slot "f", and
then push the rear of the seat down to lock it
in place as shown.
2
▲ ▲▲▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
c
e
f
▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
2. Install:
• Passenger seat "1"
TIP
Insert the projections "a" on the rear of the pas-
senger seat into the seat holders "b" as shown,
and then push the front of the seat down to lock
it in place.
▲▲▲
▼▼▼
▲▲▲
4-4
GENERAL CHASSIS