Table of Contents
Advertisement
Main Frame AV‑HS60U1/AV‑HS60U2
Front panel
1
2
3
1 Alarm indicator <ALARM>
Lights up when the cooling fan of the Main Frame AV-HS60U1/AV-HS60U2 has stopped or when there are problems (voltage declines) with the
power supply. In such cases, an alarm message is displayed on the Menu Panel AV-HS60C3. For the redundant power supply model (AV-HS60U2),
an alarm will be displayed if both <POWER> switches of the power supply 1 and the power supply 2 have not turned on.
When an alarm has occurred, details of the problem can be checked from the <SYS> button on the top menu → [MAINTENANCE] → [Alarm] tab.
(page 139)
Alarm status can be output from the alarm output port of the <GPI IN> terminal on the Main Frame AV-HS60U1/AV-HS60U2 to external devices.
f AV-HS60U1 does not have the alarm indicator for the power supply 2.
2 Power indicator <POWER>
Lights up when power is input into the <AC IN 1>/<AC IN 2> terminal and also when the <POWER> switches of the power supply 1 and the power
supply 2 are set to <ON>.
f AV-HS60U1 does not have the power indicator for the power supply 2.
3 <POWER> switch
Turns power on/off.
f The single power supply model (AV-HS60U1) does not have the <POWER> switch for the power supply 2.
f When turning off the power of the redundant power supply model (AV-HS60U2), set both <POWER> switches for the power supply 1 and the
power supply 2 to <OFF>.
@
NOTE
t When an alarm has occurred, stop using the unit immediately, and be sure to contact your dealer.
Rear panel
3
4
1 <SDI IN 1> to <SDI IN 32> terminals (connector: BNC×32/signal: SDI IN)
<SDI IN 25> to <SDI IN 32> terminals are equipped with color correctors.
The <SDI IN 27>/<SDI IN 28>/<SDI IN 31>/<SDI IN 32> terminals are equipped with up-converters.
2 <DVI‑D IN1>/<DVI‑D IN2> terminals (connector: DVI‑D×2/signal: DVI‑D IN)
Connects DVI-D output devices such as a computer using DVI-D cables.
f The DVI-I connector cable cannot be used.
3 <SDI OUT 1> to <SDI OUT 16> terminals (connector: BNC×32/signal: SDI OUT)
Assigns SDI OUT signals from the <IN OUT> button on the top menu → [SDI OUT] → [Assign] tab. (2 distributions each) (page 112)
<SDI OUT 13> to <SDI OUT 16> terminals are equipped with color correctors.
<SDI OUT 14>/<SDI OUT 16> terminals are equipped with down-converters.
4 <LAN> terminal (connector: RJ‑45/signal: 100Base‑TX)
Connects second and further Control Panels AV-HS60C1/AV-HS60C2, menu operation computers, and external devices.
f Images from the Control Panel AV-HS60C1/AV-HS60C2 connected to this terminal cannot be displayed on the Menu Panel AV-HS60C3.
Chapter 3 Part Names and Functions — Main Frame AV‑HS60U1/AV‑HS60U2
Power supply 2
Power supply 1
1
5
6
7
2
8
9
10
– 19 –
11
12
13
14
Advertisement
Table of Contents
