Resetting The Connection Information Of The Registered - Sony RM-LVR3 User Manual

Note
Register cameras before connection standby mode of the remote control is canceled.
The multi camera control function is only available with the compatible cameras.
When operating a camera that does not support the multi camera control function, set the connection mode
to (single connection).
You cannot copy images recorded in the camera to the remote control.
The WPS method is used for connecting the remote control to multiple cameras. If there is another device
using the WPS method in the vicinity of the cameras, the registration may fail. If the registration fails,
reconnect by performing each step again.
[12] Getting Started
connection)

Resetting the connection information of the registered

camera
This function is only available when the camera is in multi connection.
Press the MENU button.
1
Press the UP button or DOWN button to select
2
(reset network settings), then press the REC/ENTER button.
Press the UP button or DOWN button to select
3
press the REC/ENTER button.
[13] Shooting Shooting movies and still images
Switching shooting modes
Switch the shooting mode by pressing the UP button or DOWN button on the Live-View display of the
remote control during single connection.
Connecting the remote control to multiple cameras via Wi-Fi (Multi
(Remote control settings) -
(execute) or (cancel), then