Overview; About The Operation Guide For Optional Ip Control; Required Equipment For Ip Connection - Sony RM-IP10 Operation Manual

Overview

About the Operation
Guide for Optional IP
Control
This manual is the operation guide for using the IP
remote controller RM-IP10, and the IP control card
BRBK-IP10/IP7Z.
You can operate up to 112 cameras from the IP remote
controller RM-IP10 by using a commercially available
switching hub. Up to five IP remote controllers,
connected to the same network, can operate a combined
total of 112 cameras.
Required equipment for IP
connection
IP remote controller RM-IP10
You can control up to 112 cameras that are compatible
with IP connection, and you can add up to five IP remote
controllers in the same network.
The joystick of the IP remote controller allows
comfortable pan/tilt and zoom operations.
You can also select the RS-232C or RS-422 connection
and operate up to seven cameras.
Note
Select the LAN, RS-232C or RS-422 connection. You
cannot use multiple communication methods
simultaneously.
Supplied accessories: AC adaptor (1), AC power cord
(1), RS-422 connector plug (2), CD-ROM (1)
IP control card BRBK-IP10 (for BRC-H900/Z330)
By inserting this card into BRC-H900/Z330, the camera
can use an IP connection.
This card outputs an HD-SDI signal conforming to
SMPTE 292 serial digital interface standards, or outputs
an SD-SDI signal conforming to SMPTE 259M serial
digital interface standards. An audio signal is not output
from the card.
IP control card BRBK-IP7Z (for BRC-Z700)
By inserting this card into BRC-Z700, the camera can
use an IP connection.
This card outputs an HD-SDI signal conforming to
SMPTE 292 serial digital interface standards, or outputs
an SD-SDI signal conforming to SMPTE 259M serial
digital interface standards. An audio signal is not output
from the card.

About the Operation Guide for Optional IP Control

GB
3
GB