Table of Contents
Advertisement
06-01
Failed to format the recording medium.
06-02
The memory card does not support XAVC S movie recording.
Use an SDHC or SDXC memory card faster than Class10 when recording movies in XAVC S.
Set the movie format to MP4.
06-03
The NTSC/PAL setting of the media and the NTSC/PAL setting of the camera are different.
Switch the NTSC/PAL setting of the camera or format the media.
06-04
The memory card does not support XAVC S 100 Mbps movie recording.
Use the memory card that supports UHS-I U3 standard when you are shooting in XAVC S 100
Mbps.
07-01/07-02/07-03
Failed to play.
There is an abnormality in the recording media.
Signal traffic may be heavy or the remote control may be too far from the access point.
07-04
Failed to delete the file.
Signal traffic may be heavy or the remote control may be too far from the access point.
10-01
The camera's temperature has risen. Turn the power of the camera off and leave the camera alone
for 10 minutes or longer.
Code starting with an E or a C (Example: E41:00)
When a code starting with a letter appears in the monitor, the self-diagnosis of the remote control is
working.
Press the MENU button, REC/ENTER button, and DOWN button of the remote control simultaneously
to reset it.
If the problem persists, some repairs may be necessary. Please consult your nearest Sony dealer and
inform them of all codes starting with an E or a C.
Advertisement
Table of Contents
