Sony RM-LVR3 User Manual page 17

Note
Once all procedures until step
be connected when you turn on the power.
The shortened character string of the camera is displayed on the remote control with "DIRECT-"
removed from the SSID.
You cannot copy images recorded in the camera to the remote control.
If you cannot connect the remote control to the camera via Wi-Fi/ if the
connection is not established
If the remote control cannot connect to the camera via Wi-Fi, check that the remote control is in
single connection mode. If the remote control is not in the single connection mode, change the
connection mode and try again.
If the connection to the camera is not established, the signal traffic may be heavy. In this case,
move to another location and try again.
[11] Getting Started
connection)
Connecting the remote control to multiple cameras via
Wi-Fi
You can connect the remote control to a maximum of five cameras and operate all cameras
simultaneously.
are completed, the remote control and the camera will automatically
Connecting the remote control to multiple cameras via Wi-Fi (Multi