Table of Contents
Advertisement
(soft beep volume)
Note
When the Beep is set to OFF, this function cannot be set.
[47] Changing the Settings
Lamp setting
To prevent the lamp light from reflecting off of the subject, you can limit the number of REC lamps
that turn on when recording.
Press the MENU button.
1
Press the UP button or DOWN button to set
2
setting) - setting value, then press the REC/ENTER button.
(all of the REC lamps of the camera light up)
(only the REC lamp on the connector cover of the camera lights up)
(REC lamps of the camera do not light up)
Hint
Change the lamp setting for the camera if objects such as glass may be reflected on the shooting direction.
[48] Changing the Settings
One touch recording
Press the REC/ENTER button of the camera while the camera is off, and the camera will turn on and
start recording.
This function is available when the shooting mode is movie, time-lapse capture, live streaming, or
loop recording.
Camera settings
Camera settings
(Camera Settings) -
(Lamp
Advertisement
Table of Contents
