Table of Contents
Advertisement
Formatting starts when you select
Formatting cancels when you select
The formatting completes when a screen with check mark is displayed. Press the REC/ENTER
button to return to the previous MENU.
Note
Save important images to devices such as a computer before formatting.
You cannot format the camera from the remote control when the remote control is not connected to the
camera via Wi-Fi.
[43] Changing the Settings
Time code/user bit
You can use the time code/user bit function when the shooting mode is set to the movie mode and
the movie record format is set to XAVC S.
Press the MENU button.
1
Press the UP button or DOWN button to select
2
(Time code/user bit) - setting item, then press the REC/ENTER button.
The set items and details are as follows.
(Sets the time code)
1. Press the UP button or DOWN button to select 2-digit numbers, then press the REC/ENTER
button.
2. Repeat step 1 until you set four 2-digit numbers, then return to the previous MENU.
The time code can be selected within the following range.
When selecting 30p or 60p
00:00:00:00 - 23:59:59:29
When selecting 25p or 50p
00:00:00:00 - 23:59:59:24
When selecting 24p, you can set the last 2 time code digits of the frames in multiples of
4, between 0 and 23.
(Resets the time code)
Reset is executed when you select
(execute), then press the REC/ENTER button.
(cancel), then press the REC/ENTER button.
Camera settings
, then press REC/ENTER button.
(Camera Settings) -
Advertisement
Table of Contents
