Attaching The Remote Control To The - Sony RM-LVR3 User Manual

Live-view remote
Hide thumbs Also See for RM-LVR3:
Table of Contents

Advertisement

Attaching the remote control to the belt
Attach the remote control to the belt.
Align the protruding portion of the remote control with the concave portion of the
1
belt, while pulling the release lever on the rear of the belt toward the opposite side
with your finger.
Make sure that the remote control is set into the belt, then remove your finger from
2
the release lever.
To fasten the remote control to your arm, pass the one end of the belt through the
3
hole on the other end of the belt, and fasten the belt with
the belt securely.
Note
Attaching the belt incorrectly may cause injury.
Be careful not to drop the remote control when unfastening the belt.
. Then slide
to hold

Advertisement

Table of Contents
loading

Table of Contents