Table of Contents
Advertisement
Detach the cover.
3
Remove the battery pack.
4
Note
When removing the built-in battery pack of the remote control, be careful of the followings.
Remove the screws, etc. away from small children to prevent accidental swallowing.
Be careful not to injure your nails or fingers.
[84] Troubleshooting
Cannot connect the remote control and the camera via
Wi-Fi.
If you cannot connect the camera to the remote control properly, try the operation below.
Check the camera and the remote control connection mode are set to the single connection mode.
If not, change the connection mode and connect again.
Advertisement
Table of Contents
