Table of Contents
Advertisement
[45] Changing the Settings
Beep
You can set the audible notification for camera operation.
Press the MENU button.
1
Press the UP button or DOWN button to select
2
(Beep) - setting value, then press the REC/ENTER button.
(All operation sounds are enabled)
(Operation sounds are emitted for the following operations only)
Power turned on
Recording started
Recording stopped
Shutter pressed
A disabled operation was selected or an error occurred
Connection confirmation beep
Power turned off (FDR-X3000/HDR-AS300)
(All operation sounds are disabled)
*
will be displayed instead of
Note
When the remote control is not connected to the camera via Wi-Fi, the camera settings cannot be changed.
[46] Changing the Settings
Beep volume
You can set the beep volume of the camera when operating the camera with the remote control.
Press the MENU button.
1
Press the UP button or DOWN button to set
2
volume) - setting value, then press the REC/ENTER button.
(loud beep volume)
Camera settings
depending on the connected camera.
Camera settings
(Camera Settings) -
(Camera Settings) -
*
(Beep
Advertisement
Table of Contents
