Removing a hot-swap storage drive
Use this information to remove a hot-swap storage drive.
The blade server has two hot-swap storage bays for installing or removing
hot-swap storage devices. To remove a hot-swap hard disk drive or drive filler,
complete the following steps.
1. Before you begin, read "Safety" on page v and "Installation guidelines" on
2. If possible, save the data on your drive, especially if it is part of a RAID array,
3. Press the release latch (orange) on the storage drive to release the drive handle.
4. Pull the release handle to remove the drive from the storage bay.
26
BladeCenter HS23 Types 7875 and 1929: Installation and User's Guide
page 17.
before you remove it from the blade server.