Table of Contents
Advertisement
34
BladeCenter HS23 Types 7875 and 1929: Installation and User's Guide
surface on any other grounded rack component; then, carefully remove the
microprocessor and the installation tool from the package.
c. Release the sides of the cover and remove the cover from the installation
tool. The microprocessor is preinstalled on the installation tool.
Note: Do not touch the microprocessor contacts. Contaminants on the
microprocessor contacts, such as oil from your skin, can cause connection
failures between the contacts and the socket.
d. Align the installation tool with the microprocessor socket. The installation
tool rests flush on the socket only if properly aligned.
e. Install the microprocessor using the following instructions for your
installation tool.
v If using Installation Tool A, twist the handle on the microprocessor tool
assembly counterclockwise to the open position to insert the
microprocessor into the socket, and lift the installation tool out of the
socket.
v If using Installation Tool B, twist the handle of the installation tool
assembly counterclockwise until the microprocessor is inserted into the
socket, and lift the installation tool out of the socket. The following
illustration shows the tool handle in the open position.
Advertisement
Table of Contents
