Table of Contents
Advertisement
Figure 2. Installation Tool B
Figure 3. Installation tool handle adjustment
Attention:
v Do not press the microprocessor into the socket.
v Do not touch exposed pins of the microprocessor socket.
v Make sure that the microprocessor is oriented and aligned correctly in
the socket before you try to close the microprocessor retainer.
v Do not touch the thermal material on the bottom of the heat sink or on
top of the microprocessor. Touching the thermal material will
contaminate it.
11. Close the microprocessor socket release levers and retainer:
Chapter 3. Installing options
35
Advertisement
Table of Contents
