Error Handling - Kyocera 6551ci Operation Manual

Setup and Registration (System Menu) > System Menu
For Custom 1-8, settings for duplex printing and media type name can be changed.
Item
Duplex Print Prohibit
Permit
Name
Measurement
Common Settings
Item
Measurement

Error Handling

Common Settings
Item
Duplexing Error
Finishing Error
No Staple Error
Finished Pages Exceeded
Duplex printing not allowed.
Duplex printing allowed.
Change names for Custom 1-8. Names should be not more than 16 characters. Selecting
media type at multi purpose tray, the name after change will be displayed.
Character Entry Method (page 11-9)
Select inch or metric for the unit for paper dimensions.
Value: mm, inch
Set what to do when duplex printing is not possible for the selected paper sizes and media
types.
Value
1-sided: Printed in 1-sided
Display Error: Message to cancel printing is displayed.
Set alternative actions when finishing (Staple/Punch/Offset/Fold/Auto Image Rotation) is not
available for the selected paper size or media type.
Value
Ignore: The setting is ignored and the job is printed.
Display Error: Message to cancel printing is displayed.
Set what to do when staples run out during printing.
Value
Ignore: Printing continues without stapling.
Display Error: Message to cancel printing is displayed.
NOTE
Requires the optional 4,000-Sheet Finisher.
Set what to do when finishing (stapling or offsetting) capacity is exceeded during printing.
Value
Ignore: Printing continues without finishing.
Display Error: Message to cancel printing is displayed.
NOTE
Requires the optional 4,000-Sheet Finisher.
8-14
Description
Description
Description