Function Defaults - Kyocera 6551ci Operation Manual

Setup and Registration (System Menu) > System Menu

Function Defaults

Common Settings
If you want to enable the changed defaults immediately, move to the function screen and press the [Reset] key.
Item
Original Orientation
Original Image (Copy)
Org. Image (Send/Store)
Scan Resolution
*
FAX TX Resolution
Color Selection (Copy)
Color Select.(Send/Store)
File Format
File Separation
Backgrnd Density (Copy)
BackgrndDens.(Send/Store)
Prevent Bleed-thru (Copy)
Prevent Bleed(Send/Store)
Zoom
Border Erase Default
Set the original orientation defaults.
Value: Top Edge on Top, Top Edge on Left
Set the default original document type for copying.
Value: Text+Photo (Printer), Text+Photo (Magazine), Photo (Printer), Photo (Magazine),
Photo (Photo Paper), Text, Text (Fine Line), Graphic/Map (Printer), Graphic/Map
(Magazine)
Set the default original document type for sending/storing.
Value: Text + Photo, Photo, Text, Text (for OCR)
Select the default scanning resolution.
Value: 600×600dpi, 400×400dpi Ultra Fine, 300×300dpi, 200×400dpi Super Fine,
200×200dpi Fine, 200×100dpi Normal
For details, refer to the FAX Operation Guide.
Set the default copying color mode setting.
Value: Auto Color, Full Color, Black & White
Select the default color mode for scanning documents.
Value: Auto Color (Color/Gray), Auto Color (Color/B & W), Full Color, Grayscale,
Black & White
Set the default type of the files.
Value: PDF, TIFF, JPEG, XPS, High Comp. PDF
Select the default file separation setting.
Value: Off, Each Page
Set the default Backgrnd Density (Copy).
Value: Off, Auto, Manual (Darker 5)
Set the default Backgrnd Density (Send/Store).
Value: Off, Auto, Manual (Darker 5)
Set the default value for preventing bleed-through (Copy).
Value: Off, On
Set the default Prevent Bleed (Send/Store).
Value: Off, On
Select the enlarged/reduced default when paper size/sending size changed after the originals
set.
Value: 100%, Auto
Set the default width to be erased as a border.
Value
Metric: 0 to 50 mm (in 1 mm increments)
Inch: 0 to 2" (in 0.01" increments)
NOTE
To specify border erase widths around original, set the value in "Border". To specify border
erase widths in the middle of original, set the value in "Gutter".
8-17
Description