POSIFLEX PD – 7301 Series User Manual
POSIFLEX PD – 7301 Series User Manual

POSIFLEX PD – 7301 Series User Manual

Pole mount customer display

Advertisement

PD – 7301/7311/7321 Series
User's Manual
Rev. Original
FCC Notes:
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions
manual,
may
cause
interference
to
radio
communications. It has been tested and found to comply with
limits for a Class A digital device pursuant to subpart J of Part 15 of FCC Rules, which
are designed to provide reasonable protection against interference when operated in a
commercial environment. Operation of this equipment in a residential area is likely to
cause interference in which case the user at his own expense will be required to take
whatever measures to correct the interference.
Warranty Limits:
Warranty terminates automatically when any person other than the authorized
technicians opens the machine. The user should consult his/her dealer for the problem
happened. Warranty voids if the user does not follow the instructions in application of
this merchandise. The manufacturer is by no means responsible for any damage or
hazard caused by improper application.
About This Manual:
Posiflex has made every effort for the accuracy of the content in this manual. However,
Posiflex will assume no liability for any technical inaccuracies or editorial or other
errors or omissions contained herein, nor for direct, indirect, incidental, consequential
or otherwise damages, including without limitation loss of data or profits, resulting
from the furnishing, performance, or use of this material.
This information is provided "as is" and Posiflex Inc. expressly disclaims any
warranties, expressed, implied or statutory, including without limitation implied
warranties of merchantability or fitness for particular purpose, good title and against
infringement.
The information in this manual contains only essential hardware concerns for general
user and is subject to change without notice. Posiflex reserves the right to alter product
designs, layouts or drivers without notification. The system integrator shall provide
applicative notices and arrangement for special options utilizing this product. The user
may find the most up to date information of the hardware from web sites:
http://www.posiflex.com or http://www.posiflex.com.tw
All data should be backed-up prior to the installation of any drive unit or storage
peripheral. Posiflex will not be responsible for any loss of data resulting from the use,
disuse or misuse of this or any other Posiflex product.
All rights are strictly reserved. No part of this documentation may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic,
mechanical, photocopying, or otherwise, without prior express written consent from
Posiflex Inc. the publisher of this documentation.
© Copyright Posiflex Inc. 2006
All brand and product names and trademarks are the property of their respective holders.
Part 1
P/N: 19480900010

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PD – 7301 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for POSIFLEX PD – 7301 Series

  • Page 1 About This Manual: Posiflex has made every effort for the accuracy of the content in this manual. However, Posiflex will assume no liability for any technical inaccuracies or editorial or other errors or omissions contained herein, nor for direct, indirect, incidental, consequential or otherwise damages, including without limitation loss of data or profits, resulting from the furnishing, performance, or use of this material.
  • Page 2 • Large character font size with backlight for easy readability and comfort in short term and long term viewing • Rear mount Pole Display for Posiflex HT series hybrid terminals and PB-2200/4200 discrete systems. • Large amount of information display for two lines of 20...
  • Page 3: Model Numbers

    • Support 2 Code Pages of 128 characters each • Support Chinese character GB-2312 or BIG-5 Character (16 x 16 dot) • Support 12 international character sets of 12 characters each • 3 User defined characters for PD-7301 and 2 User defined characters for PD-7311/7321) •...
  • Page 4 information that is easily readable in wide range of ambient light. It is ideal for point-of-sale terminals, and a wide range of business and industrial equipment. INSTALLATION GUIDES HOST SYSTEM PREPARAION For serial interface (RS232) PD-7301/7311/7321 to be used in HT or PB series, you have to adjust during power off the internal jumper of the host system to supply 5 V DC to the COM port selected for PD-7301/7311/7321.
  • Page 5 tube of PD-7301/7311/7321 close against the PD-73X1 Base side wall of HT or PB chassis. Match the 2 cylindrical locating bosses into 2 round holes Fixing screw plate. side 7301/7311/7321 base with the screw holes HT or PB shall face against the sidewall of HT or PB chassis sidewall system chassis.
  • Page 6: Driver Installation

    JPOS (Java POS) driver does not support the PD-7301/7311/7321 series. COMMAND CODES For software command codes application. Please visit our web site http://www.posiflex.com or http://www.posiflex.com.tw for details on software commands if required. AFTER POWERING UP A two-row message as power on sign will appear on the screen for a while.
  • Page 7 SPECIFICATION OPTICAL Number of characters Alphanumeric: 20 characters/row, 2 rows Alphanumeric: 26 characters/row, 4 rows Chinese: 10 characters/row, 2 rows Dot matrix format 8 x 16 or 6 x 8 dots for alphanumeric 16 x 16 for Chinese Character height 2 row alphanumeric: 18.35 mm 4 row alphanumeric: 9.15 mm Chinese: 18.35 mm...
  • Page 8 USING THE CUSTOMER DISPLAY DISPLAYING DATA All data in 8-bit format received can be classified into 2 categories as data to display or command codes for the customer display unit to respond. For this series, unless under pass through mode or as part of the command code, any byte between and including <20>h and <FF>h is regarded as alphanumerical data to display according to ASCII table (the <XX>h means the hexadecimal expression).
  • Page 9 20 CHINESE characters (addresses: B0A1, B1A2, B2A3, ……, BEAF, BFB0, C0B1, ……, C3B4) one by one in bottom row. The PD then shows and enters “Wrap Around Mode” and shows ASCII code font from 21 to 7F (HEX) starting from Home position. The PD enters and shows “Vertical Scroll Mode”...
  • Page 10 T31454 警告使用者 這是甲類的資訊產品,在居住的環 境 中 使 用 時 , 可 能 會 造 成 射 頻 干 擾,在這種情況下,使用者會被要 求採取某些適當的對策。 Part 10...

This manual is also suitable for:

Pd – 7311 seriesPd – 7321 series

Table of Contents