POSIFLEX HT-4600 Series User Manual
Hide thumbs Also See for HT-4600 Series:

Advertisement

Quick Links

HT-4600/HT-4600E
PB-4600/PB-4600E
User's Manual
FCC Notes:
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions manual, may cause interference to radio
communications. It has been tested and found to comply with
limits for a Class A digital device pursuant to subpart J of Part 15 of FCC Rules, which
are designed to provide reasonable protection against interference when operated in a
commercial environment. Operation of this equipment in a residential area is likely to
cause interference in which case the user at his own expense will be required to take
whatever measures to correct the interference.
Warranty Limits:
Warranty terminates automatically when any person other than the authorized
technicians opens the machine. The user should consult his/her dealer for the problem
happened. Warranty voids if the user does not follow the instructions in application of
this merchandise. The manufacturer is by no means responsible for any damage or
hazard caused by improper application.
About This Manual:
Posiflex has made every effort for the accuracy of the content in this manual. However,
Posiflex will assume no liability for any technical inaccuracies or editorial or other
errors or omissions contained herein, nor for direct, indirect, incidental, consequential
or otherwise damages, including without limitation loss of data or profits, resulting
from the furnishing, performance, or use of this material.
This information is provided "as is" and Posiflex Technology, Inc. expressly disclaims
any warranties, expressed, implied or statutory, including without limitation implied
warranties of merchantability or fitness for particular purpose, good title and against
infringement.
The information in this manual contains only essential hardware concerns for general
user and is subject to change without notice. Posiflex reserves the right to alter product
designs, layouts or drivers without notification. The system integrator shall provide
applicative notices and arrangement for special options utilizing this product. The user
may find the most up to date information of the hardware from web sites:
http://www.posiflex.com or http://www.posiflex.com.tw
All data should be backed-up prior to the installation of any drive unit or storage
peripheral. Posiflex will not be responsible for any loss of data resulting from the use,
disuse or misuse of this or any other Posiflex product.
All rights are strictly reserved. No part of this documentation may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic,
mechanical, photocopying, or otherwise, without prior express written consent from
Posiflex Technology Inc. the publisher of this documentation.
© Copyright Posiflex Technology Inc. 2011
All brand and product names and trademarks are the property of their respective holders.
P/N: 15410900040
Series
Rev. C0
Page 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HT-4600 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for POSIFLEX HT-4600 Series

  • Page 1 About This Manual: Posiflex has made every effort for the accuracy of the content in this manual. However, Posiflex will assume no liability for any technical inaccuracies or editorial or other errors or omissions contained herein, nor for direct, indirect, incidental, consequential or otherwise damages, including without limitation loss of data or profits, resulting from the furnishing, performance, or use of this material.
  • Page 2: Brief Introduction

    THE USER’S MANUAL The purpose of this manual is to guide the user in the initial installation and general use of the Posiflex HT/PB-4600/E series of POS terminals. It does not explain any application software that may be supplied with it.
  • Page 3: The Standard Features

    development tools that are now inexpensively available and abundant. For the HT-4600/E series terminal is powered by most up to date CPU and provides a color TFT LCD screen with a resistive type touch control panel on sturdy and easily adjustable structure on top of the main unit. HT/PB-4600/E series may be used as a self-content unit or as one of several terminals in a network system controlled by a “back office”...
  • Page 4: The Optional Items

    HT-4600/E system unit with the 12.1” LCD panel integrated on top or PB-4600/E system unit. User’s manual. Recovery DVD for preloaded OS or Posiflex Product Information DVD for driver utilities without OS. Optional components installed to system unit as ordered.
  • Page 5: Wireless Lan (Option)

    MAIN CONNECTION AREA The HT/PB-4600/E series is constructed for very easy maintenance. Press inward both plastic buttons at lower rear corners on both sides of the system unit (circled in right picture) to release the lower part of back cable cover. Please note that there are 2 plastic hooks on top cover holding the back cable cover as marked on upper part of the picture.
  • Page 6: Customer Display (Option)

    +12V DC supply in the VGA connector under technical guidance from your distributor. CUSTOMER DISPLAY (OPTION) For HT/PB-4600/E series, Posiflex provides customer pole displays for terminal integration such as PD- 2601/2601U and PD-307/307U. Please follow the Installation Guide in package of the options. The customer display will occupy one USB or COM port in the connection area.
  • Page 7: Audio Port

    For the HT/PB-4600/E system preloaded with Windows system on HDD, Posiflex provides recovery DVD delivered with the hybrid terminal for the preloaded operating system. The System Integrator shall take care of software restoration after OS recovered. Use a USB interface external CDROM or DVD COMBO drive for such action.
  • Page 8: Operating System Installation

    Therefore, installation of an OS into a system without preloaded OS is highly discouraged. Posiflex shall not be responsible for any technical support to questions arisen due to non-preloaded...
  • Page 9: Power On/Off Control

    This may cause permanent damage to any other monitor not designed to use this facility. Please use only a Posiflex monitor designed for the HT system. Consult your dealer if you have any doubt. It is strongly advised that connection/disconnection to this port should never take place when system power is ON.
  • Page 10 software command so that when this switch is accidentally pressed during system turned on, the system just remains on and unaffected. Software Off Command The system may also be shut down under software control. Please just follow the arrangement by your system integrator for this capability. Automatic Power On Control The system may also turn on according to some preset conditions such as Modem Ring Up and Alarm Clock Wake Up or LAN Wake Up.
  • Page 11 The operation range is limited within the primary display area. A program named “Posiflex Touch Terminal Manager” is installed in the preloaded Windows system for the user to maneuver versatile features of the touch terminal with a touch panel controller. This program can also be...
  • Page 12: Customer Display

    USB touch manager A program named “Posiflex USB Touch Manager” and a right-click sticky button tool in the program group “Posiflex USB Touch Tools” is installed in the preloaded Windows system if a USB interface touch panel controller is installed.
  • Page 13 from the chassis as indicated by the hollow arrow in the right picture. Please then pull the bottom Front Cover side of front cover forward release bottom Release Opening hooks of front cover from the chassis as indicated by Chassis Bottom View hollow arrow left...
  • Page 14 HT-4600/E PB-4600/E Front Ventilation Grids on Chassis Ventilation Holes on Front Cover Replacing Front Cover Follow the opposite procedure as removing the front cover to replace the front cover in position. Please make sure the all hooks on front cover is well positioned into chassis.
  • Page 15 Cleaning for Side Ventilation Use vacuum cleaner to remove any dust or threads accumulation away from outsides of both ventilation grids on chassis exposed after removal of the front cover as in pictures below and close back the top cover when done. Side Ventilation Grids on...

This manual is also suitable for:

Ht-4600e seriesPb-4600 seriesPb-4600e seriesHt-4600eHt-4600xPb-4600 ... Show all

Table of Contents