System Settings - RetroSound RetroRadio Apache User Manual

OPERATING YOUR RADIO
Balance
This sub-menu (
bal
This may be helpful in compensating for the position of the driver
in relation to the vehicle's speakers. Adjustment range is from 0-12
between left and right speakers.
Fader
This sub-menu (
fader
front and rear speakers. Adjustment range is from 0-12 between front
and rear speakers.
XBAS
This sub-menu (
XBAS
volumes. This should only be used at low volume levels and should be
set to XBAS OFF at higher volumes.
Bass Crossover Frequency
This sub-menu (
BAS 80H
tones between 60Hz, 80Hz, 100Hz or 200Hz.
Middle Crossover Frequency
This sub-menu (
MID 1.0K
tones between 0.5KHz, 1.0KHz, 1.5KHz or 2.5KHz.
Treble Crossover Frequency
This sub-menu (
TRE 10.0K
tones between 10.0KHz, 12.5KHz, 15.0KHz or 17.5KHz.

SYSTEM SETTINGS

The System Settings sub-menu system enables access to numerous
additional features of your radio. Press and hold the right-front knob
(#4) for three seconds to access the System Settings sub-menu.
Then rotate the right-front knob (#4) clockwise to scroll through the
available sub-menu options. In a specific sub-menu, press the right-
front knob (#4) to change the options.
) allows adjustment of stereo sound to left or right.
) allows you to adjust the sound between the
) boosts bass and treble for listening at low
) adjusts the frequency crossover of the bass-
) adjusts the frequency crossover of the mid-
) adjusts the frequency crossover of the treble-
Copyright © 2019 Retro Manufacturing, LLC
18