Programming
You can change the standard settings
of your cooktop (see chart).
Proceed as follows:
^ With the cooktop switched off, touch
the cooktop ON/OFF sensor s and
the safety lock sensor $ at the same
time until the indicator lamp for the
safety lock flashes.
A P (Programme) and a S (Status) will
appear in the cooking zone display with
a number which shows the current
setting (see chart).
^ To select the programme you want
touch the + or - sensor for the front
left cooking zone, then select the
required status by touching the + or -
sensor for the front right cooking
zone (see chart). You can alter
several programmes one after the
other in this manner.
36
To store the new settings in memory,
touch the cooktop ON/OFF sensor s
until the displays go out.
If you do not wish to store the settings
in memory, touch the safety lock sensor
$ until the displays go out.